SMC CRA1 Series Rotary Actuator Rack and Pinion Type, CRA1LSU50-90Z Jewelry Pliers Cr C0r Grease Oil Y2

Cr C0r Grease Oil Y2 Y3 Y0 1213 65 120 23 1

Compact Cylinder Type Standard Bore Diameter 50 mm Stroke 20 mm Piston Action Double-Acting Mounting Type Both Ends Tapped Rod Type Single Rod Cushion Type Rubber Bumper Options With rubber bumper/Rod end male thread Cylinder Series CQ2 Port Thread Standard BSPT Rod Gender Male

due to contact seal   Speed capability  Good Good Limited by contact seals  Grease-sealing effectiveness  Good Better than ZZ type  Slightly better than VV type  Dust resistance Good Better than ZZ type (usable in moderately dusty environments) Best (usable even in very dusty environments)  Water resistance Not suitable Not suitable Good (usable even if fluid is splashed on bearing)   Operating temperature –10 to +110 °C –10 to +110 °C –10 to +110 °C   Note (1) The above temperature range applies to standard bearings

Type: Long Nose Application: For Work Near Energized Sources Special Features: Flame Retardant and Impact Resistant Handle Overall Length: 7-3/8'' (187

SMC CRA1 Series Rotary Actuator Rack and Pinion Type, CRA1LSU50-90Z Jewelry Pliers Cr C0r Grease Oil Y2OVERVIEW The CRA1 rack & pinion rotary actuator offers very high torque to size and accurate positioning. Bore sizes are 30, 50, 63, 80 and 100mm. Units may be ordered auto switch capable and with cushions. Dimensions range from 3" X 4" X 2" to a maximum of 8" X 9. 65" X 4. 41". Single shaft end or double shaft end models are available. Can be mounted on 2 sides of a small auto switch ( D M9?? span> type ) Can be mounted from the front of the auto