FILTEC Insertion Tool, Semi-Automatic Stroke_19^300mm 5hp at 220~240V for 1

5hp at 220~240V for 1 phase motors 15hp at 200~208V for 3 phase motors 15hp at 220~240V for 3 phase motors 30hp at 440~480V for 3 phase motors 30hp at 550~600V for 3 phase motors NEMA size 30hp at 550~600V for 3 phase motors Rated Short-time withstand current 700A at 1s 300A at 10s 190A at 30s 120A at 1min 80A at 3min 65A at 10min 60A at =15min Conductor size (AWG) 8~6 Conductor size (mm2) 10~16 The max

HANSHIN Depressed Center Grinding Wheel Ceramic 180mm (7')* 8T

Cr C0r Grease Oil 7010CTYP5 50 80 16 1 0

Far: ≈ 150×150 ㎛

FILTEC Insertion Tool, Semi-Automatic Stroke_19^300mm 5hp at 220~240V for 1FILTEC Insertion Tool, Semi Automatic An insertion tool engages the tang of the insert and winds it into the tapped hole to the correct depth below the surface. Available Sizes M3*0. 5 M4*0. 7 M5*0. 8 M6*1. 0 M10*1. 25 M10*1. 5 M12*1. 75 M14*2. 0 M8*1. 25 Key Features One tool per thread size Sets the insert below the face so the tang can be snapped off Specifications Size 3X0. 5 Specifications shown are for the base model; values vary by size.