Major Mfg - HIT-23 - Backset Redrill / Drill Guide for Relocating Cross Bore Holes Work Lights 10Base-T or 100Base-TX (using RJ-45

10Base-T or 100Base-TX (using RJ-45 jack) Wireless Protocol 900MHz

500xJMA-KWI-2DC-ENGRAVED

2004+ Expedition

with NO/NC/COM) Dimensions 3-1/8" x 2-9/16" x 1" (80 x 65 x 25 mm)

Major Mfg - HIT-23 - Backset Redrill / Drill Guide for Relocating Cross Bore Holes Work Lights 10Base-T or 100Base-TX (using RJ-45A must have tool for all locksmiths. Used to "move over" an existing 2 3 8" backset hole to 2 3 4" or 2 3 4" to 2 3 8" or to correct a mis drilled hole. The HIT 23 attatches by screwing into the existing latch faceplate mortise. A standard hole saw (not supplied) can then be guided to correct the bore. The HIT 23 is supplied with a drill blank to replace the hole saw pilot bit to reduce wear on the guide holes. Includes Drill Guide Drill Blank